Inelele de etanşare sunt garnituri cu contact. Acestea protejează lagărul contra impurităţilor, a umezelii şi contra pierderii excesive de lubrifiant.

Inelele de etanşare sunt adaptate la dimensiunile radiale reduse ale manşoanelor şi lagărelor cu ace. Sunt foarte uşor de montat, deoarece sunt presate în orificiul carcasei.

Inelele de etanşare admit viteze la buza de etanşare de până la 10 m/s, dependent de rugozitatea arborelui.

Sealing rings are designed as contact seals. They protect the bearing position against contaminants, spray water and excessive loss of grease.

The sealing rings are matched to the small radial dimensions of drawn cup needle roller bearings and needle roller bearings. They are very easy to fit, since they are simply pressed into the housing bore.

Sealing rings allow circumferential speeds at the seal lip of up to 10 m/s, dependent on the surface quality of the shaft.

Sealing rings are designed as contact seals. They protect the bearing position against contaminants, spray water and excessive loss of grease.

The sealing rings are matched to the small radial dimensions of drawn cup needle roller bearings and needle roller bearings. They are very easy to fit, since they are simply pressed into the housing bore.

Sealing rings allow circumferential speeds at the seal lip of up to 10 m/s, dependent on the surface quality of the shaft.