Capete de bară fără întreţinere

Capetele de bară fără întreţinere se compun dintr-o carcasă şi o articulaţie sferică fără întreţinere. Tija capului de bară are filet exterior sau interior. Un înveliş galvanic de zinc protejează capetele împotriva coroziunii.

Capetele de bară preiau forţe radiale în direcţia de tracţiune şi de compresiune. Ele se pretează la mişcări lente cu unghiuri pivotante mici până la medii, pentru încărcări dintr-un sens şi, mai puţin pentru solicitări oscilante (Tipul GE..-UK-2RS este pentru solicitări oscilante). Capetele de bară etanşate au garnituri cu buze de etanşare pe ambele părţi şi sunt astfel protejate împotriva impurităţilor şi a umezelii.

Capetele de bară conform DIN ISO 12 240-4, din seria de dimensiuni E au articulaţii sferice radiale de tip GE..-UK sau GE..-UK-2RS cu suprafeţe de alunecare din oţel cromatat şi PTFE sau din oţel cromatat cu ELGOGLIDE®. Ele se livrează cu filet interior sau exterior de dreapta respectiv de stânga. Datorită lăţimii reduse a ochiurilor, aceste articulaţii permit construcţii compacte.

Capetele de bară conform DIN ISO 12 240-4, din seria de dimensiuni K au articulaţii sferice radiale de tip GE..-PW cu suprafeţe glisante din oţel şi folie PTFE. Şi acestea se livrează cu filet interior sau exterior de dreapta respectiv de stânga.

INFORMAȚII SUPLIMENTARE

Catalog de produse cu sistem de selectare şi consiliere

Cruci cardanice

Maintenance-free ELGES rod ends

Maintenance-free rod ends comprise a housing with an integral shank and a maintenance-free spherical plain bearing. The housing with integral shank has an external or internal thread. The spherical plain bearing is firmly seated and located in the housing. Rod ends are protected against corrosion by a zinc plating.

Rod ends can support radial forces in a tensile or compressive direction. They are suitable for slow movements with small to moderate swivel angles, for unilateral loads and in certain cases for alternating loads (in the case of GE..-UK-2RS, also for alternating loads). Sealed rod ends have lip seals on both sides and are thus protected against contamination and spray water.

Rod ends to DIN ISO 12 240-4, series E, have radial spherical plain bearings GE..-UK or GE..-UK-2RS with a hard chromium/PTFE composite or hard chromium/ELGOGLIDE® sliding contact surface and a right hand or left hand internal or external thread. The thin walled design of the eye housing allows compact adjacent constructions.

Rod ends to DIN ISO 12 240-4, series K, have radial spherical plain bearings GE..-PW with a steel/PTFE-bronze film sliding contact surface and a right hand or left hand internal or external thread.

FURTHER INFORMATION

Product catalogue with selection and information system

Rod ends

Maintenance-free ELGES rod ends

Maintenance-free rod ends comprise a housing with an integral shank and a maintenance-free spherical plain bearing. The housing with integral shank has an external or internal thread. The spherical plain bearing is firmly seated and located in the housing. Rod ends are protected against corrosion by a zinc plating.

Rod ends can support radial forces in a tensile or compressive direction. They are suitable for slow movements with small to moderate swivel angles, for unilateral loads and in certain cases for alternating loads (in the case of GE..-UK-2RS, also for alternating loads). Sealed rod ends have lip seals on both sides and are thus protected against contamination and spray water.

Rod ends to DIN ISO 12 240-4, series E, have radial spherical plain bearings GE..-UK or GE..-UK-2RS with a hard chromium/PTFE composite or hard chromium/ELGOGLIDE® sliding contact surface and a right hand or left hand internal or external thread. The thin walled design of the eye housing allows compact adjacent constructions.

Rod ends to DIN ISO 12 240-4, series K, have radial spherical plain bearings GE..-PW with a steel/PTFE-bronze film sliding contact surface and a right hand or left hand internal or external thread.

FURTHER INFORMATION

Product catalogue with selection and information system

Rod ends