Capete de bară cu întreţinere

Capetele de bară cu întreţinere se compun dintr-o carcasă şi o articulaţie sferică cu întreţinere. Tija capului de bară are filet exterior sau interior. Un înveliş galvanic de zinc protejează capetele împotriva coroziunii.

Capetele de bară preiau forţe radiale în direcţia de tracţiune şi de compresiune. Ele se pretează la încărcări dintr-un sens şi, condiţionat, pentru solicitări oscilante. Capetele de bară etanşate au garnituri cu buze de etanşare pe ambele părţi şi sunt astfel protejate împotriva impurităţilor şi a umezelei.

Capetele de bară conform DIN ISO 12 240-4, din seria de dimensiuni E au articulaţii sferice radiale de tip GE..-DO sau GE..-DO-2RS cu suprafeţe glisante din oţel/oţel, filet interior sau exterior, de dreapta respectiv de stânga şi un niplu de lubrifiere conic conform DIN 71412. Se pot lubrifia ulterior prin niplul de lubrifiere sau prin orificiul carcasei.

Capetele de bară conform DIN ISO 12 240-4 din seria de dimensiuni K au filet interior sau exterior, de dreapta respectiv de stânga şi un niplu de lubrifiere de tip pâlnie conform DIN 3 405.

INFORMAȚII SUPLIMENTARE

Catalog de produse cu sistem de selectare şi consiliere

Cruci cardanice

ELGES rod ends requiring maintenance

These rod ends comprise a housing with an integral shank and a spherical plain bearing requiring maintenance. The housing with integral shank has an external or internal thread. The spherical plain bearing is firmly seated and located in the housing. Rod ends are protected against corrosion by a zinc plating.

Rod ends can support radial forces in a tensile or compressive direction, transmit movements and forces with low moment levels, are suitable for alternating loads and in certain cases for unilateral loads. The thin walled design of the eye housing allows compact adjacent constructions. Sealed rod ends are protected against contamination and spray water by lip seals.

Rod ends to DIN ISO 12 240-4, series E, have radial spherical plain bearings GE..-DO or GE..-DO-2RS with a steel/steel sliding contact surface, a right hand or left hand internal or external thread and taper type lubrication nipple to DIN 71412. They can be relubricated via the lubrication nipple or the housing bore.

Rod ends to DIN ISO 12 240-4, series K, have a left or right hand internal or external thread and funnel type lubrication nipple to DIN 3 405 on the eye housing.

FURTHER INFORMATION

Product catalogue with selection and information system

Rod ends

ELGES rod ends requiring maintenance

These rod ends comprise a housing with an integral shank and a spherical plain bearing requiring maintenance. The housing with integral shank has an external or internal thread. The spherical plain bearing is firmly seated and located in the housing. Rod ends are protected against corrosion by a zinc plating.

Rod ends can support radial forces in a tensile or compressive direction, transmit movements and forces with low moment levels, are suitable for alternating loads and in certain cases for unilateral loads. The thin walled design of the eye housing allows compact adjacent constructions. Sealed rod ends are protected against contamination and spray water by lip seals.

Rod ends to DIN ISO 12 240-4, series E, have radial spherical plain bearings GE..-DO or GE..-DO-2RS with a steel/steel sliding contact surface, a right hand or left hand internal or external thread and taper type lubrication nipple to DIN 71412. They can be relubricated via the lubrication nipple or the housing bore.

Rod ends to DIN ISO 12 240-4, series K, have a left or right hand internal or external thread and funnel type lubrication nipple to DIN 3 405 on the eye housing.

FURTHER INFORMATION

Product catalogue with selection and information system

Rod ends